PRODUCTS DOWNLOADS SUPPORT PRESS ROOM ABOUT EIZO PURCHASE
EIZO Showcase
Email This Page



Follow Us

   

Products

FDF2301-3D

The DuraVision FDF2301-3D is a 23" industrial monitor that displays 3D images to the naked eye using a directional backlight developed by EIZO. It is ideal for use with SEMs (scanning electron microscopes) and semiconductor inspection equipment.

Features

Glasses-Free 3D Monitor

The DuraVision FDF2301-3D produces stereoscopic (3D) images without glasses. In an industrial or academic environment where the FDF 2301-3D might be used for several hours at a time or in tandem with a 2D monitor, this saves you from having to wear cumbersome 3D glasses.

Parallel Use of a 2D and 3D Monitor with Glasses
2D Monitor 3M Monitor
Parallel Use of a 2D and 3D Monitor with Glasses
Images difficult to see with glasses Glasses necessary to see in 3D
Parallel Use of a 2D and 3D Monitor without Glasses
2D Monitor 3M Monitor
Parallel Use of a 2D and 3D Monitor without Glasses
Images difficult to see with glasses Glasses necessary to see in 3D
Full High-Definition Display

Glasses-Free 3D Monitor Video

Watch the video >>

EIZO’s directional backlight and a frame rate of 120 Hz display images in 3D at the panel’s native resolution with 1920 horizontal dots. Because it can maintain the high-resolution horizontal dot pitch necessary for 3D display, the monitor produces realistic stereoscopic images with excellent depth perception.

No Moiré, Stripe Noise, or Pseudoscopic Images

The FDF2301-3D does not produce the moiré or stripe noise often seen with 3D monitors that require glasses. Furthermore, the pseudoscopic images that result when right and left parallax images invert depending on the viewing angle are also not an issue.

Large 23" Screen

With EIZO’s patented elliptical mirror technology, the advantages of the directional backlight can be applied to a relatively large screen.

DVI-D 24-Pin and VESA Stereo Sync 3-Pin Connectors

One dual link and one single link DVI-D 24-Pin connector are included. In addition, a VESA Stereo Sync 3-pin connector that synchronizes signals so right and left parallax images are displayed properly when outputted from a graphics board that also supports VESA Stereo Sync.

  
3D Image Modes

In addition to a 120 Hz Frame Sequential mode, three other modes are included – Anaglyph, Dual Input, and Side-by-Side.

Frame Sequential

Right and left parallax images are alternately shown at a frame rate of 120 Hz.

Anaglyph

Monochrome images from the left and right eyes are combined as red and blue respectively and transmitted as color signals. The red and blue parts are then separated and converted to monochrome images and allocated as left and right parallax images. Frame rates of up to 60 Hz are supported.

Anaglyph

Dual Input

The signals of right and left parallax images are transmitted by different cables. The frequency and resolution of the signals are the same and support refresh rates of up to 60 Hz. When the right and left 3D signals are independent of each other, the two DVI-D 24-pin connectors on the monitor support dual input.

The two DVI-D 24-pin connectors cannot be used for accepting signals from two computers.

Dual Input

Side by Side

The monitor receives right and left parallax images, splits them into two, doubles their size horizontally, and alternately displays them as right and left parallax images. Because the images are doubled in size horizontally, their horizontal resolution is halved.

Compliance with Safety and Environmental Standards

The DuraVision FDF2301-3D complies with many international standards includuing RoHS, CB, and the CE Mark.